Stonefix

Stonefix

STONEFIX
HIGH ADHESIVE MIX FOR FINISHIN FOR FINISHING MATERIALS

  • For indoor and outdoor use
  • Fastening natural and artificial stone, and granite
  • Facing by tile-on-tile method
  • Easy to use
  • Reduces work time
  • Thin layer
  • Fireproof
  • Efficient for large boards
  • Tearing strength not less than 0.8 MPa
  • Super strength. Up to 80 kg/m2
  • High adhesion
  • Freeze proof
  • Waterproof

Dry building mix ТМ MASTER C1.3К2 DSTU B V.2.7-126:2011

Bar-code: 4820086380553
25 kg

Modified dry building mix ТМ MASTER. STONEFIX designed for facing with ceramic tiles, tiles from natural and artificial stone, pressed boards, granite, mosaic paving, heavy coating materials on strong rigid bases or those subject to periodic deformation. Used for work by tile-by-tile method. For indoor and outdoor use

SURFACE PREPARATION

Surface preparation must be done in accordance with the State Building Standard of Ukraine DBN V.2.6-22-2001. The base must be:

- clean (remove dirt, flows, dust, fungal lesions with a power tool or manually);

- strong (loose places must be removed and processed with the primer. To improve results, we recommend using the primer ТМ MASTER or ТМ iMASTER);

- in presence of cracks, drops or irregularities treat the base with ТМ MASTER or ТМ iMASTER, and then align with the mineral mix ТМ MASTER.  FRONT. Sandy (24 hours before the start of work);

- the surface with high water absorption and air temperature above +300С require additional moisturizing;

- surfaces pretreated with primer ТМ MASTER or ТМ iMASTER, do not require moistening.

 

INSTRUCTIONS FOR USE

Perform the work at an air temperature of +50С to +350С. The temperature of the base must be in the same range.

Add pure water to the dry mixture in an amount indicated in specifications, then mix it (use electric drills with screw socket). Leave closed mix for 5 minutes, then stir again. The closed mix is suitable for use within 180 minutes (at recommended atmospheric conditions). At high temperatures, periodically stir the closed mix to avoid reducing its mobility.

Apply the closed mix ТМ MASTER. STONEFIX on the surface with a trowel, float or leveling plate, then spread with a notched trowel. Trowel notches must match the size of the tiles as per the table.

Tile size, mm

Trowel notch size, mm

Mix average consumption, kg/m2

min 50x50

4

1.8

50x50 to 100x100

4

1.8

100х100 to 200х200

6

2.6

200х200 to 300х300

8

3.0

300х300 to 400х400

10

4.0

up to 450х450

12

5.2


Apply the facing material on the applied mix and press with a force to the base. Do not apply tiles without joints. The joint between tiles must be at least 2 mm. Do not soak tiles in advance!

The layer thickness depends on the size of trowel notches. For outdoor use and for tiles with profiled back side we strongly recommended applying additional closed mix TM MASTER. STONEFIX with a thin layer (1-2 mm) directly on tiles. Conduct grouting between tiles no earlier than 24 hours after tiling. We recommend using grout ТМ iMASTER. In case of facing floors, displacement is possible not earlier than after 48 hours.

NOTE TO A BUYER

- The base strength must be not less than the strength of the mix;

- Failure to follow the instructions for use mentioned on the package may adversely affect the aesthetic and performance properties;

- Products are not subject to mandatory certification;

- The mix is safe for human health in the production, transportation, storage, application and during the operation subject to following the requirements of this standard to production safety and health;

- Keep away from children;

- Date of manufacture, shelf life and batch number are mentioned on the package;

- Use only for the intended purpose.

- The manufacturer is not responsible for the use of the material for the purpose and under conditions not covered by this instruction.

- This instruction is a recommendation and does not substitute the professional training of the contractor.

Dry building mix ТМ MASTER C1.3К2 DSTU B V.2.7-126:2011

Ingredients

Cement-sand mix modified with mineral fillers and polymeric additives

Size of aggregate, maximum

0.8 mm

Time the closed mix is suitable for

180 minutes

Open time

25 - 30 minutes

Adjustment time

15 - 20 minutes

Strength of adhesion to base, min

0.8 MPa

Displacement of material from the vertical surface, max

0.1 mm

Holding materials weighing up

8 g / 1 cm2

Recommended amount of water for preparing the mix

0.21 L / 1 kg of mix

Application temperature

+50С to +350С

Operation temperature

-500С to +700С

Frost resistance, min

50 cycles

All of these recommendations are efficient at +200С and relative humidity of 60%.

SAFETY RULES

Dry building mixture contains cement, which causes alkaline reaction in hydration. When using the mix, use the personal protective equipment (respirator and rubber gloves). When working, protect the skin and eyes. In case of a mixture contact with eyes, rinse them immediately with plenty of water and seek medical advice.

Expiration date: 12 months from the date of manufacture mentioned on the package.

Must be disposed of in accordance the State Standard of Ukraine DSanPiN 2.2.7.029

Storage conditions: Store in the original intact packaging, on pallets, in dry premises at temperatures below +400С and humidity of 75%.

Warranty period: The manufacturer guarantees compliance of the quality with the requirements of this standard for the period specified on the package, provided the requirements of transport and storage are followed.